Posted on

West Memphis sees brief power outage in high heat


Tips for beating the heat without breaking the bank this summer

[email protected] Even in the best of times, a power outage can be an inconvenience, but when the heat index is in triple digits, even a shor time without electricity can prove dangerous.

But such was the case Monday when a West Memphis neighborhood was without power for a short time during the Mid-South’s first major heat wave of the summer.

The city was quick to issue an alert as well as an apology from the West Memphis Utility Department “for any inconvenience this may have caused.”

The release said, in part, ”We are working diligently to make the necessary repairs in a timely manner.

West Memphis Utility Servicemen are currently working to determine an estimated repair time.”

And such was the case.

City officials said the power was only out briefly and was necessitatede by the need to make a temportary switch in the city’s power grid.

“The outage was caused by a sub-station at West Tyler Avenue and South Woods Street potentially overheating and needing to transfer that power to another unit,” said city communications official Nick Coulter.

“People along Dover were affected briefly as the substation switched over.”

Summer Energy Saving Tips and Tricks

In the last few years, the United States and Canada have experienced some of the hottest summers on record. The nine warmest years on record are 2016, 2015, 2017, 2018, 2014, 2010, 2013, 2005, 2009, and 1998. The summer of 2019 already seems to be on its way to continuing that trend.

Aside from being an ecological disaster, these hot summer days can also be a disaster for your wallet. By far, the largest part of your energy bill comes from your home’s heating and cooling system. With your AC running 24/7 all summer long, you can expect some of your highest electric bills of the year to come between June and September.

Fortunately, you don’t have to boil in the summer heat just to save a few bucks.

By following these simple summer energy-saving tips, you can keep the temperature, and your budget, well within the comfort zone.

1. Check Your Air Conditioning

Your air conditioner requires regular maintenance to function efficiently throughout its years of service. Neglecting necessary maintenance ensures poor performance and unnecessarily high energy use. Checking the coils, fins, evaporative cooler, and heat pump may require the services of a professional.

You don’t have to be a certified HVAC technician to give your A/C a quick, basic check and make sure that it can do its job effectively. Vacuum air vents regularly to remove any dust buildup and ensure that furniture and other objects are not blocking the airflow through your vents.

Avoid placing lamps or TV sets near your thermostat.

The thermostat will sense the heat these appliances create, which can cause your A/C to run longer than necessary.

2. Replace Your Air Filter

Replacing your air filter is one of the easiest and most effective things you can do to make sure that your A/C runs smoothly and efficiently. Clogged, dirty filters block normal airflow and reduce your air conditioner’s ability to absorb heat. Replacing a dirty filter with a clean one can lower your A/C’s energy usage by up to 15%.

Clean or replace your air conditioning system’s filter every month or two. Filters need more frequent attention if your A/C is in constant use, is subjected to excessive dust, or if you have fur-shedding pets.

Single-room air conditioners will have a filter mounted in the grill that faces into the room. In central air systems, you can find the filter somewhere along the length of the return duct. Common locations are in walls, ceilings, furnaces, or in the air conditioner itself.

3. Opt for LED Lights

If you’re still using incandescent light bulbs, then it’s time to switch to LED lights. Incandescent bulbs are extremely inefficient.

Only about 10 to 15% of the electricity that they use gets turned into light—the rest becomes waste heat.

LED lights are the most energy-efficient lighting option currently available.

They use 75% less energy, last 25 times longer, and run much cooler than standard incandescent lights.

Continued on Page 3 ENERGY (cont.) They cost a little more up front but soon pay for themselves in savings.

Set your thermostat as high as comfortably possible in the summer, ideally 78°F or higher. Every degree of extra cooling will increase energy usage six to eight percent. Keep your house warmer than normal when your family is away at school and work, and lower the temperature only when people are at home. Avoid lowering the thermostat while air conditioning is running. It won’t cool your house any faster and may result in energy waste.

A smart thermostat can make these temperature transitions easy. Smart thermostats are Wi-Fi enabled devices that automatically adjust the temperature settings in your home for peak energy efficiency. Smart thermostats learn your habits and preferences and establish a schedule that automatically adjusts to energy-saving temps when you are asleep or away.

Running a fan is much cheaper than running your air conditioning. In fact, running a fan 24/7 for an entire month would only cost about 5 dollars on your electricity bill.

Unfortunately, don’t actually produce cold air—they just move the existing air around. The air flow creates a wind chill effect that helps people feel more comfortable, but it does nothing to change the temperature.

However, fans and air conditioning work very well together. If you use air conditioning, a ceiling fan will allow you to set your thermostat setting about 4°F higher with no reduction in comfort. Remember to turn your fans off when you leave the house. With no people around to feel the wind chill effect, the fans aren’t doing much except making your energy bill slightly higher.

6. Close Your Blinds

Close your blinds or drapes in the daytime to keep out the greenhouse effect of the sun. Southern- and western- facing walls take the brunt of the sun’s heat, so invest in good drapes or shades for the windows on these walls and keep them closed. North-facing windows admit relatively even, natural light, producing little glare and almost no unwanted summer heat gain. You can leave these shades open to admit natural light into your house without heating things up.

7. Avoid the Oven

Cooking with a conventional oven can add unwanted heat to your house, forcing your A/C to work harder. Do more of your cooking with a microwave or slow cooker to keep the kitchen cool.

Better yet, use the summer heat as an excuse to fire up the old backyard barbeque. Outdoor grilling is a summertime tradition for a reason— you can cook delicious meats and veggies while keeping the heat outside.

8. Wash Strategically

Washing machines, clothes dryers, and dishwashers all generate a ton of heat. Cut back on this by only using cold water to do your washing. Wash only full loads of dishes and clothes to avoid running the appliances too much. Avoid using your clothes dryer entirely. After washing, hang up your wet clothes to air dry.

Since you’re not using as much hot water, you can also turn down the temperature on your water heater.

According to the U.S.

Department of Energy, water heating can account for 14 to 25 percent of your total energy use. Turning your heater down to the warm setting of 120 degrees Fahrenheit can save you a few bucks every month.

9. Not Using It, Unplug It

From your computer to your toaster, all electronics generate heat. Even if it’s switched off, just being plugged in generates a small amount of heat in the wiring. Too keep things cool, unplug any electronics you’re not using. It’s not much per device, but add up all the gizmos in your home, and it can make a few degrees difference.

10. Seal Your Home

Insulation isn’t just for the cold winter months.

Preventing air leaks is one of the best ways to keep warm air out and cool air in. Simple caulking and weather-stripping can save up to 30 percent on heating and cooling costs.

Sealing your home against these leaks is easy, effective, and relatively inexpensive. Use caulk to seal cracks and openings between stationary objects like door and window frames. Apply weatherstripping around things that move, such as window sashes and the door itself.

Be sure to check your attic and basement for air leaks, as these floors have large gaps in insulation or missing weather-stripping. Seal the small cracks with foam or caulk. For larger holes, you may need to install or replace insulation.

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll Up